November 28, 2016
The sun was shining and no rain in the forecast ...
we decided to finish erecting the car shelter ...
All the hardware needed for the next step ...
was laid out ...
Mike pounded in the stakes to hold the frame down ...
The end and front pieces were attached first ...
The main cover was unrolled flat on the ground ...
2 bars were put thru the pouches ... and then 2 ropes were attached ...
The ropes were flung over the frame ... and Mike an I pulled on the ropes ...
to raise the tarp over the frame ...
Once that part was done ... we move inside to finish tying it down ...
The bars were put thru the channels ... brackets attached ...
then the ends were tightened ... using the rachets ... pulling the straps ...
The shelter was now ready ...
for the VW and parts to be put inside ...
It took us a couple hours to complete this project today ...
Good job ...
ReplyDelete